Topic: ATT: Fundies of Tinychan
+Anonymous A — 11.7 years ago #39,804
Hypothetically speaking, would you be willing to take the place of another person in hell for all eternity? Bear in mind that from the Christian perspective, it would likely be the ultimate act of self-sacrifice.
(Edited 29 seconds later.)
+Anonymous B — 11.7 years ago, 40 minutes later[T] [B] #437,277
+Anonymous C — 11.7 years ago, 9 minutes later, 49 minutes after the original post[T] [B] #437,280
@OP
No. We can only hope to bring every soul to salvation. If the sinner had been repentant he could have avoided his fate.
"And if your hand causes you to stumble, cut it off; it is better for you to enter life crippled, than having your two hands, to go into hell, into the unquenchable fire." Mark 9:43
No. We can only hope to bring every soul to salvation. If the sinner had been repentant he could have avoided his fate.
"And if your hand causes you to stumble, cut it off; it is better for you to enter life crippled, than having your two hands, to go into hell, into the unquenchable fire." Mark 9:43
+Anonymous D — 11.7 years ago, 4 minutes later, 53 minutes after the original post[T] [B] #437,281
·Anonymous B — 11.7 years ago, 10 minutes later, 1 hour after the original post[T] [B] #437,282
·Anonymous D — 11.7 years ago, 2 minutes later, 1 hour after the original post[T] [B] #437,283
@437,281 (D)
·Anonymous C — 11.7 years ago, 20 minutes later, 1 hour after the original post[T] [B] #437,285
·Anonymous A (OP) — 11.7 years ago, 4 hours later, 6 hours after the original post[T] [B] #437,313
+Anonymous E — 11.7 years ago, 10 hours later, 16 hours after the original post[T] [B] #437,354
·Anonymous B — 11.7 years ago, 1 hour later, 17 hours after the original post[T] [B] #437,359
+Anonymous F — 11.7 years ago, 4 hours later, 22 hours after the original post[T] [B] #437,376
+Anonymous G — 11.7 years ago, 1 hour later, 23 hours after the original post[T] [B] #437,386
·sriahc sselb dog — 11.7 years ago, 4 hours later, 1 day after the original post[T] [B] #437,395
·Anonymous A (OP) — 11.7 years ago, 2 hours later, 1 day after the original post[T] [B] #437,404
@previous (sriahc sselb dog )
> Yes, but that makes for a very short list.
So, you'd sacrifice your life but not your soul for that person?
> Yes, but that makes for a very short list.
So, you'd sacrifice your life but not your soul for that person?
·Anonymous C — 11.7 years ago, 1 hour later, 1 day after the original post[T] [B] #437,407
@previous (A)
At what point does the body stop and the soul begins? Where do you tease out the soul from a corpse?
At what point does the body stop and the soul begins? Where do you tease out the soul from a corpse?
·Anonymous A (OP) — 11.7 years ago, 53 minutes later, 1 day after the original post[T] [B] #437,432
@previous (C)
It's a hypothetical question. I'm not trying to prove or disprove the existence of the soul.
It's a hypothetical question. I'm not trying to prove or disprove the existence of the soul.
·Anonymous B — 11.7 years ago, 5 minutes later, 1 day after the original post[T] [B] #437,436
+Anonymous H — 11.7 years ago, 27 minutes later, 1 day after the original post[T] [B] #437,440
+Anonymous I — 11.7 years ago, 6 hours later, 1 day after the original post[T] [B] #437,471
+Anonymous J — 11.7 years ago, 12 minutes later, 1 day after the original post[T] [B] #437,472
@437,354 (E)Hell certainly does exist, on Earth. I know, because I created it. As a dictator, I can confirm this.
C̗i̻a̫̫͓̙o͎̭͉͓͙̤̺,̲ T̻̮̬͈̲͚h̤̺̻̝̜̹e̞̗̥̜̱̜̙ ̗̟̺̯Ḓi͎͍c̱͕t̪̻a̭̞͓ͅto̭̟͈̲r.̪̗͖
+FUCK !YAH.boners — 11.7 years ago, 9 hours later, 2 days after the original post[T] [B] #437,531
32 Configuring SAP to send RDI data
Configuring SAP for RDI data
Note: The customized SAPscript Form is given a name to differentiate the Form from the original SAPscript Form, usually starting with a Y or Z, for example Z_RVINVOICE01.
This section describes how to activate RDI data output by setting a flag in a customized SAPscript Form. If you want to activate RDI output in the print program, see your SAP system documentation.
To activate RDI data output from a SAPscript Form
1 Create a copy of the original SAPScript Form from which you want to output RDI data. This section uses a copy of the RVINVOICE01 invoice in the Sales & Distribution module as an example.
Note: Give the customized SAPscript Form a unique name to differentiate the Form from the original SAPscript Form, for example Z_RVINVOICE01.
2 In the transaction box, enter /nSE71. The Form Painter: Request window opens.
3 Specify the SAPscript Form settings.

SAPscript Form settings
Form
The name of the customized SAPscript Form you copied.
Note: Ensure the customized SAPscript Form has a unique name to differentiate it from the original Form, for example Z_RVINVOICE01.
Language
The language for the original Form, such as DE (German).
Note: The language for all Forms in a standard SAP system distribution is German.
4 In the Sub-objects area, select Header.
5 Click Change. The Form: Change Header window opens.
6 Select Attributes > Miscellaneous. The RDI Output Parameter dialog box opens.
7 In the RDI output mode box, select RDI Output Mode: ‘Spool’ (X).
Configuring SAP for RDI data
Note: The customized SAPscript Form is given a name to differentiate the Form from the original SAPscript Form, usually starting with a Y or Z, for example Z_RVINVOICE01.
This section describes how to activate RDI data output by setting a flag in a customized SAPscript Form. If you want to activate RDI output in the print program, see your SAP system documentation.
To activate RDI data output from a SAPscript Form
1 Create a copy of the original SAPScript Form from which you want to output RDI data. This section uses a copy of the RVINVOICE01 invoice in the Sales & Distribution module as an example.
Note: Give the customized SAPscript Form a unique name to differentiate the Form from the original SAPscript Form, for example Z_RVINVOICE01.
2 In the transaction box, enter /nSE71. The Form Painter: Request window opens.
3 Specify the SAPscript Form settings.

SAPscript Form settings
Form
The name of the customized SAPscript Form you copied.
Note: Ensure the customized SAPscript Form has a unique name to differentiate it from the original Form, for example Z_RVINVOICE01.
Language
The language for the original Form, such as DE (German).
Note: The language for all Forms in a standard SAP system distribution is German.
4 In the Sub-objects area, select Header.
5 Click Change. The Form: Change Header window opens.
6 Select Attributes > Miscellaneous. The RDI Output Parameter dialog box opens.
7 In the RDI output mode box, select RDI Output Mode: ‘Spool’ (X).
·FUCK !YAH.boners — 11.7 years ago, 31 seconds later, 2 days after the original post[T] [B] #437,532
In SAP, RDI output mode is equivalent to Enable Raw Data Interface -- any application using this SAPscript Form will generate raw data instead of formatted data, given that the value of RAW_DATA_INTERFACE in the application's print program is set to ‘*’ (default value).
StreamServe Persuasion SP5 StreamServe Connect for SAP - E-docs User Guide Rev A
Configuring SAP to send RDI data 33 Configuring SAP for RDI data
8 If you want to use a default output device for RDI data for this SAPscript Form, in the Output device box, enter the name of the default output device.
If you specify a default output device, when a user prints data with this SAPscript Form, the system will override the printer selection and use the specified default output device. Thereby making RDI processing transparent to end-users, enabling you to select the same printer for standard SAP output and output to be processed by StreamServe.
You must configure the default output device as described in Creating a plain output device on page 30.
9 Click Enter.
StreamServe Persuasion SP5 StreamServe Connect for SAP - E-docs User Guide Rev A
Configuring SAP to send RDI data 33 Configuring SAP for RDI data
8 If you want to use a default output device for RDI data for this SAPscript Form, in the Output device box, enter the name of the default output device.
If you specify a default output device, when a user prints data with this SAPscript Form, the system will override the printer selection and use the specified default output device. Thereby making RDI processing transparent to end-users, enabling you to select the same printer for standard SAP output and output to be processed by StreamServe.
You must configure the default output device as described in Creating a plain output device on page 30.
9 Click Enter.
Start a new topic to continue this conversation.
Or browse the latest topics.